To better illustrate this point, let’s discuss the most common PSI ranges per each airbrush feed option. Commonly recommended air pressure (PSI) for a Gravity feed airbrush is anywhere between 12 PSI – 45 PSI depending on the viscosity of the material being sprayed.

The exact air pressure should you airbrush at for perfect results on models, Step-by-Step action plan!

The pressure depends on multiple factors such as the type of airbrush, viscosity of the material you intend to spray, and the surface area on which you will apply the paint. This article provides a detailed guide on how airbrush pressure works and how …

Each airbrush has a pressure at which atomization is the best, and this is the point at which you will get the finest spray pattern (not necessarily the narrowest spray, but the particles of paint are as small as they are going to be).

I always tell people to spray with as little pressure they can get away with but enough to do the job. Here’s the method I use to figure out what airbrush pressure i should spray at. Start at roughly 10 psi. Spray paint. If it’s not what you want turn the pressure up. Repeat until you get the desired spray consistency.

application chart Airbrush description Recommended spray & color media and properly reduced materials. 1 = Best Choice 2 = Very Good Choice 3 = Good Choice for Certain Applications

The list of terms, the cut-away airbrush diagram, and the reference chart will help you select the best airbrush for your intended application. But if you have questions, you can always call us at 1(800) AIR-BRUSH.

Jan 31, 2019 · That regulator can be set for your 15 PSI, and, as long as the upstream air pressure is higher than that, your air brush should see a steady stream of air at the dialed in pressure of 15 PSI, or whatever pressure you choose to set it for.

As a rule of thumb, the middle-ground pressure for painting with an airbrush is between 15 and 20psi depending on whether the airbrush is gravity-fed or not. Gravity-fed airbrushes are identifiable by their reservoir which will be located on top of the brush (while other types will have it underneath), these generally require slightly less ...

The key factors in properly spraying an airbrush are operating air pressure, amount of material being released by the airbrush, and the distance the airbrush is being held from the surface being sprayed.