Field wiring diagram, panel schematic and installa-tion instructions included. Panel can be wired for a single power feed for pump and control circuit or the control circuit can be wired to a separate power supply to insure alarm integrity in case of a tripped pump breaker.

Single Pump Motor, Max Motor Load 1 hp @ 120V, 3 hp @ 230V; Works with 1 wide angle float, or 2-3 regular floats. Type 1 or Type 4X Enclosures; Level Based Pump Control (Drainage Pumps, Septic Systems…)

Use grounding jumper wires. a. Connect the pump leads to the control panel. When connecting the pump leads it is very critical that the prop er sequence be main tained. On single phase pumps, the color coded pump leads black, white, red, must be connected to the appropriate terminals as directed by the control schematic. b.

REFER TO THE PANEL SCHEMATIC FOR COMPLETE INFORMATION. Determine mounting location for the control panel. If splicing is required between the level switches and the panel, we recommend a junction box. CAUTION! Use conduit sealant and waterproof wire nuts for connections. Make sure all connections are water tight.

An Electrical Control Panel is used on a Simplex pump application where automatic electrical cycling of the pump is desired for added protection in residential or commercial applications. A Control Panel is required for all systems using a nonautomatic pump.

trols breaker and with the incoming L1 power line. Use another wire nut to connect the neutral block of the pump with the control.

This latest generation Model 112 control panel controls one 120, 208, or 240 VAC single phase pump in water and sewage installations. This panel includes a new innovative simplex controller for pump control and alarm; including float status LEDs, control/alarm power on/off switch with …

Use one wire nut to connect the pump and controls circuit breakers together with the incoming L1 power line. Use another wire nut to connect the pump and controls neutral blocks together with the incoming neutral line.

Use one wire nut to connect the pump and controls circuit breakers together with the incoming L1 power line. Use another wire nut to connect the pump and controls neutral blocks together with the incoming neutral line.

Wire 1 ut Use one wire nut to connect the pole of the pump circuit breaker together with the controls breaker and with the incoming L1 power line. Use another wire nut to connect the neutral block of the pump with the controls neutral block and with the incoming neutral line. Power Wiring Options Terminal Strip 00025 ETM Controls Neutral Ground ...